120L Universal/General Purpose Spill Kit.

If you experience a spill of hazardous liquids such as fuels, solvents or chemicals it’s important that you have the facility to deal with the incident efficiently and safely. These emergency spill kits form part of our comprehensive spill response product range and contains a kit each for oil and fuel, chemical and general spillages. Each of the full kits comprises of five absorbent socks, fifty absorbent pads, one yellow wheeled bin with a 120 litre capacity, three disposable bags with ties and an instruction sheet. We also supply refill kits, these are a cost-effective way to replenish your spill kits when all your absorbents have been used. Each refill kit is available for different types of spills including oil and fuel, general or chemical. Please note that the refill kits do not contain the 120 Universal/General Purpose Spill Kit

Each kit is capable of absorbing up to 120 litres of liquid, using both the absorbent pads and socks, and is suitable for a variety of workplaces including workshops, garages and factories. Another great feature of these kits is that they are very easy to move to a range of locations thanks to the wheelie bin in which the absorbents are housed.

INDUSTRY: 120l Universal/General Purpose Spill Kit.

120L universal/general purpose spill kit ( Universal absorbent spill kits)  is suitable in the major Manufaturing and processing company, Aviation, Oil and gas and are ideal for workshops and in areas where larger spills may occur.

USAGE :120l Universal/General Purpose Spill Kit.

120L Emergency purpose spill kits  (Universal spill kits) will clean up the whole spill at one time as long as you don’t need to separate oil from water.

Step 1

Remove the contents of the spill kit from the plastic disposal bucket.  Set aside.

Step 2

Put on goggles, face mask, and rubber gloves for protection.

Step 3

Using the barrier agent powder, encircle the area of spilled battery acid to prevent further spreading.

Step 4

Liberally apply baking soda to battery acid, floor, and barrier agent powder.  Apply more baking soda to any areas that show a “bubbling” reaction – continue until reaction stops.

Step 5

Place the plastic container bag inside the bucket – the lip of the bag should cover hand over the edges of the bucket.

Step 6

Apply backing powder to inside walls of the plastic bag with a liberal layer on the bottom of the bag.

Step 7

Apply solidifier powder to the area of the spill – wait 10 minutes for liquid to be absorbed.

Step 8

Using a broom and dustpan, sweep up all powder and dispose of in the plastic container bag.

Step 9

Reapply baking soda to entire area to neutralize any remaining battery acid – sweep into dustpan and dispose of in the plastic container bag.

Step 10

Seal plastic container bag.  Leave bag in plastic bucket container and seal bucket.

Step 11

Mark bucket with hazardous waste sticker (included) and dispose of properly.

If all steps were followed correctly, the area should now be safe to clean and mop with conventional methods.

Other types of spill kits like oil and fuel spill kits and chemical spill kits can be gotten at @jashsupplies.com  all over Nigeria cities like  Lagos, Ibadan, Iseyin, Portharcourt, Warri, kanao, Kaduna and Abuja.