25L Fuel & Oil Purpose Spill Kit.

25L Fuel  & Oil purpose spill kits range from quick response kits to those that are a requirement around a work site or any other environment where a possible oil spill may occur.

Kits are designed for spillage of oils, fuels, and solvents, whether a cabinet on the wall or a wheeled bin/chest for easy maneuverability. Kits may include absorbent socks to contain spills and protect drains or absorbent pads to soak up spilled liquids.

Disposal bags and zip ties are usually included in kits. Instructions for use are displayed on exterior labels. (Please check the kit contents, unless you are purchasing single items)

For use on all hydrocarbons (oil, fuel, solvent)

Provides the means to respond promptly to spills and leaks.

All kits come with a refill pack option to reduce costs once the kit has been used.

The refill pack contents list shows what comes in the refill.

INDUSTRY: 25l Fuel &Oil Purpose Spill Kit.

25L Fuel & Oil Purpose spill kit is suitable for the major manufacturing and processing companies, Aviation, Oil, and Gas, and is ideal for workshops and in areas where larger spills may occur.

USAGE:120l Fuel & Oil Purpose Spill Kit.

120L Fuel & Oil will clean up the whole spill at one time if you need to separate oil from water.

Step 1

Remove the contents of the spill kit from the plastic disposal bucket.  Set aside.

Step 2

Put on goggles, a face mask, and rubber gloves for protection.

Step 3

Using the barrier agent powder, encircle the area of spilled battery acid to prevent further spreading.

Step 4

Liberally apply baking soda to battery acid, floor, and barrier agent powder.  Apply more baking soda to any areas that show a “bubbling” reaction – continue until the reaction stops.

Step 5

Place the plastic container bag inside the bucket – the lip of the bag should cover the hand over the edges of the bucket.

Step 6

Apply backing powder to the inside walls of the plastic bag with a liberal layer on the bottom of the bag.

Step 7

Apply solidifier powder to the area of the spill – wait 10 minutes for the liquid to be absorbed.

Step 8

Using a broom and dustpan, sweep up all powder and dispose of it in the plastic container bag.

Step 9

Reapply baking soda to the entire area to neutralize any remaining battery acid – sweep into the dustpan and dispose of it in the plastic container bag.

Step 10

Seal plastic container bag.  Leave the bag in a plastic bucket container and seal the bucket.

Step 11

Mark the bucket with a hazardous waste sticker (included) and dispose of it properly.

If all steps were followed correctly, the area should now be safe to clean and mop with conventional methods.

Other types of spill kits like oil and fuel spill kits and chemical spill kits can be gotten at @jashsupplies.com  all over Nigeria cities like  Lagos, Ibadan, Iseyin, Portharcourt, Warri, kano, Kaduna, and Abuja.